Description
The 14.5-ounce TUBE ACRYL-GREEN SPOT (8-05096) is a 3M Acryl Putty that restores smooth, perfect surfaces in automotive and marine finishes by filing small pinholes, scratches, stone chips, and other minor flaws. The acrylic glazing putty has good workability, is easy to sand, spreads smoothly, and has low shrinkage, effectively conceals the repaired section. Once fully cured, the putty has a low shrinkage rate and excellent adhesion to the surface. The reconditioned patch will not flake or chip.
Key Features:
- Putty conceals minor surface flaws.
- Good spreadability is one of the features that makes it easy to deal with
- With superb feathering, it maintains smooth edges.
- Shrinkage is low, which means superior end outcomes.
- Spotty repair putty that dries quickly and is easy to sand
- Loads without paper and sands in 10 to 15 minutes.
- Fast, medium and slow drying formulations are all available.
Specifications:
- SKU: 8-05096
- Weight: 1.00 LBS
- UPC: 051131050969
- MPN: 7000028276
- Sale Unit: TUBE
- Industry: Automotive
- Product Type: Glaze
- Brand: 3M
- Condition: New
- This product replaces: 71-05096, 8-05960, 51131050969, 051131-05096
Patch Minor Imperfections3M™ Acryl Putty fills minor surface blemishes in cars, trucks, vans, boats and other vehicles. 3M acrylic glazing putty offers excellent workability with easy and smooth spreadability that effectively conceals pinholes, sand scratches and other spot repairs. Once the putty fully cures, you'll appreciate its low rate of shrinkage and excellent adhesion to the surface. The repaired patch will resist flaking and chipping.Better Feathering Means Less Work3M spot putty offers high quality feathering properties, meaning it is easy to smooth out the edges to blend with the surrounding surface. Good feathering will produce more satisfactory results and reduce sanding.3M™ Acryl-Green Putty is a fast drying formula with a 1.5 minute work time and 15 minute sanding timeChoose the Putty that's Right for You3M™ Acryl Putty comes in multiple formulas offering different rates of drying, working time and sanding time. Use these numbers as estimates only. Actual drying, work and sanding times will vary depending on environmental conditions.Formulas Include: 3M™ Acryl-White Putty is a slow drying formula with a 2.5 minute work time and 25 minute sanding time 3M™ Acryl-Red Putty is a medium drying formula with 2 minute work time and 20 minute sanding time 3M™ Acryl-Green Putty is a fast drying formula with a 1.5 minute work time and 15 minute sanding time Available in green, white and red, 3M™ Acryl Putty restores smooth, flawless surfacesDirections for Use: Do not apply when ambient temperatures are below 55°F or above 110°F. Use in a well ventilated area away from sparks or open flame. (Do not apply material below the water line unless top coating.) For best results apply only over clean primed surfaces. (Use compressed air to remove any dust contamination). Apply using a plastic or metal spreader pressing the putty firmly into the imperfections; keep the application thickness to 1/16" or less. Apply in thin coats instead of one thick application. Allow to dry prior to sanding. Sand (wet or dry) using 3M™ abrasives in the following sequence: P180, P220, P320. Note: As with any putty, longer drying times will occur with high humidity, thick applications and low temperatures. Re-clean surface prior to priming or top coating. (Follow paint manufacturer's recommendation for priming and top coating).
This product replaces:
- 71-05096, 8-05960, 51131050969, 051131-05096
