Description
10" x 2-1/4" Hub & Drum W/ 5 on 4.5" Bolt Pattern For 3,500lb Axles Dexter strives to provide the best in quality and value. Hub & drum kits come with some of your main components like the inner and outer bearings. The grease seal, grease cap, and wheel nuts are also included. This hub & drum is designed for use with a #84 spindle. Each hub has a 1,750lb capacity. Spindle nut and spindle washer sold separately. Each hub & drum has unique cooling fins to help keep your brakes cool. Proudly made in the USA! Kit Includes: 1 L68149 Inner Bearing (1.378" ID) 1 L44649 Outer Bearing (1.063" ID) 1 L44610 Outer Race (Already Pressed In) 1.98" OD 1 L68111 Inner Race (Already Pressed In) 2.361" OD 1 10-19 Grease Seal (1.719" x 2.565") 1 46749 Grease Cap (1.986" OD) 5 X1023R Coned Wheel Nuts 1 5 on 4.5" Hub & Drum 1,750lb Capacity Per Hub Use with a 10" x 2-1/4" brake To determine the bolt circle on hubs or wheels with an odd number of bolt holes, measure from outside to center of the studs across the pattern(bolt patterns are always measured in inches). Example: If you were to number the studs 1, 2, 3, then you would measure from the outside of stud 1 to the center of stud 3.
