Description
In general, rollers are necessary for the loading and unloading procedure. They safeguard the boat against collisions with the trailer at crucial moments. While being trailered, loaded, and unloaded, these rollers help support the boat's hull and avoid damage.
A bracket, sometimes known as a roller bracket, holds a keel roller in place. This roller would be held fit by caps, pins, or nuts and have a shaft going through its center. This assembly is fastened to the trailer's cross-member using bolts or u-bolts. The impact of absorbing the attaching and launching your boat is through Keel Roller- resistant to cuts and abrasions. It makes it possible for your watercraft to spin freely and roll without difficulty on the trailer when launched.
Key Features:
-
It comes with a premium-quality roller shaft and two pal nuts.
-
Applicable for use with 5-inch rollers
-
A 5-inch bow, keel, or wobbling roller with a 5/8 inch diameter hole may be mounted on a zinc-plated roller shaft using pal nuts.
-
Built to deal with sea conditions without difficulty
-
Enables easy roller rotation and supports the length of the roller
-
Assists with trailers and shields your boat from dings caused by touch with the trailer
Product Specifications:
-
Brand: Tie Down Engineering
-
SKU: 34-86028
-
Type: Roller Shafts
-
Weight: 0.59 LBS
-
Size: 5/8" x 6-1/4"
-
Diameter: 5/8 inch
-
Length: 6 1/4 inch length
-
Material: Zinc-plated steel
-
Unit Of Measure: EA
-
Manufacturer Part Number (MPN): 86028
