Description
13X21 Stainless Steel 4 Blade Right Hand PROP EXPRESS Mach4 (31432130) is the propeller that gave Performance its "four"! Turning Point's Four Blade revolutionized the propeller market when it was first introduced. No one had previously created a cutting-edge Swept Cleaver design for 40-150 horsepower applications. These propellers rewrote the rules, demonstrating that you can run a four-blade propeller with unparalleled holeshot, handling, and rough weather stability without the top-end speed loss that other manufacturers' propellers suffer from. These Turning Point props delivered up to 46% more reverse thrust than similar designs in recent tests.
The Express Mach4 series, now available in our industry-leading TP17 stainless, is ideal for any application that requires increased acceleration, cornering, or weight carrying characteristics.
Key Features:
- Express Mach4 Stainless Steel Swept Cleaver 4 Blade Props with 4.25" Gearcases for 40-150hp Engines.
- Holeshot, lift, handling, turning ease, and rough water stability are unheard of.
- As with other manufacturers' 4 blade propellers, top-end speed is maintained at three blades.
- The Swept Cleaver is a four-bladed prop with a three-blade top-end speed, a rapid holeshot, and unparalleled handling.
- Exhaust vents have been fine-tuned to improve hole shot and reversibility to "Best in Class" levels.
- New casting technology, more robust materials, improved corrosion resistance, and a more excellent gloss
- Turning Point's cutting-edge designs are included.
- The Express range of props incorporates cutting-edge casting technology and race-proven finishing and tuning techniques.
- TP17 is proprietary stainless steel.
Product Specifications:
- SKU: 31432130
- UPC: 652480206696
- Weight: 12.00 LBS
- Hub Kit: Not Included
- PITCH: 21
- MATERIAL: Stainless Steel
- Manufacturer Part Number (MPN): 31432130
- Alternate Products SKU: "8M0055563", "31432130"
How Does Turning Point Design Industry Leading Performance Props?
When Turning Point designs a new prop for a given category, they identify the best performing OEM and Aftermarket stainless steel props in the market that fits into that category. A better aluminum & stainless steel version is designed at the same time using the same geometry & drawing. Through testing, Turning Points engineers modify the design until it performs better than the best competitive Stainless Steel prop.
Why upgrade to a Tuning Point stainless steel propeller?
- Stainless steel propellers are much more durable compared to aluminum.
- Substantial better performance over competitive aluminum propellers. (Minimal performance difference, around 0.5-1mph speed gain over Turning Point Aluminum Propeller Designs.)
- Expect better performance over competitive OEM and Aftermarket Stainless Steel propellers.
The Prop that put the four in Perfourmance! Turning Points Four Blade Hustler revolutionized the aluminum propeller market when introduced over 6 years ago. No one had ever produced a state-of-the-art Swept Cleaver design for 40-150hp applications. These props re-wrote the rules, proving that you can run a four blade that has unprecedented hole shot, handling, and rough water stability without the top-end speed loss you experience with other manufacturers propellers. These Turning Point props also produced up to 46% more reverse thrust than other comparable designs in recent tests.
Now manufactured in our Industry leading TP17 stainless, the Express Mach4 series is perfect for any application that demands enhanced acceleration, cornering, and load carrying capabilities. This prop series is ideally suited for watersports, sterndrive boats, tri-toons, bay boats, and any vessel that can use stern lift. It is our best upgrade of older stainless designs from the 70s, 80s, 90s, and 00s, and will outrun most newer props, including five blade ski props.
Lifts the entire boat higher out of the water:
By lifting the hull higher, boats tend to lose less speed when fully loaded versus a three blade prop. With a lightly loaded boat, a three blade is usually the faster prop for most applications. Alternatively when an application is loaded down with extra people and gear, a three bladed prop can lose up to 3 MPH. This is because the hull is forced deeper into the water causing more wetted surface by the added weight. By lifting the hull higher the Turning Point 4 blade when fully loaded does not lose the top end speed compared to a three blade propeller.
Proprietary Stainless Steel, TP17:
Formulated to meet the exacting requirements of the New Express Mach3 and Mach4 designs. 20% higher chromium content than the competition - more shine, better corrosion resistance. Almost 250% Stronger and 5X more durable than run-of-the-mill stainless steel. This new material allows Turning Point's Engineers and Designers the freedom to produce radical new designs that will help you wring the most performance out of your boat.
Large Free Flowing Exhaust Ports:
Turning Point's Propeller Housings have massive Exhaust flow pathways. Their Propellers have 40% more exhaust flow Area versus competive product. More exhaust flow and less backpressure can generate more horsepower. Like headers for your boat.
This product replaces:
- 652480206696, EX2-1321-4, EX1-1321-4
