Description
Evinrude, Johnson And Gale Outboard Motors Impeller - Sierra Marine Engine Parts (18-3043) is positioned on a shaft and has a hub with attached vanes. The flexible vanes are rotated on an eccentric within a stainless-steel liner in the pump housing by the hub. While the boat's engine is operating, an impeller pumps cold water into it to keep it cool. The water pump in marine engines has an impeller. Because there is no wall between the vanes, outboard impellers are slightly weaker than closed or semi-closed impellers. The blade stresses are substantially lower. The fluid enters the impeller's eye, where vanes contribute energy and direct it to the nozzle discharge. The most liquid does not flow back due to a small space between the vanes and the pump volute or backplate.
Key Features:
-
To maintain efficiency over time, modify the clearance to compensate for wear on the bowl and edge of the vane.
-
Not more difficult to inspect for damage and maintain than closed impellers because the interior elements are visible.
-
They are more readily able to adjust the flow properties.
-
Impellers with open blades are typically faster and easier to maintain.
Specification:
-
SKU: 18-3043
-
UPC: 030999315052
-
Weight: 0.35 LBS
-
Engine Parts (18-3043)
Impeller fitting Johnson/Evinrude Outboard applications 85-235hp from 1973-78
This product replaces:
- 47-3043, GLM89680, 92-89680, AP008, 30999315052, 9-45203
