Description
Digital Yacht WLN30 NMEA Multiplexer | Boat Supply Store
Bridge your traditional NMEA 0183 marine electronics to modern mobile navigation platforms with the Digital Yacht WLN30. This intelligent multiplexer creates a secure Wi-Fi network, enabling full chart plotter functionality on tablets and smartphones by transmitting vital data streams. Featuring 3x NMEA 0183 inputs and 1x NMEA 0183 output, it supports configurable baud rates of 4800 and 38400, suitable for integrating GPS, AIS, and instrument data for enhanced situational awareness on your vessel.
Key Features
- Integrate 3 NMEA 0183 inputs with your digital devices
- Transmit instrument data wirelessly via Wi-Fi
- Control autopilots bi-directionally over Wi-Fi
- Configure baud rates (4800/38400) easily via web interface
- Connect to navigation apps on smartphones and tablets
- Utilize TCP and UDP protocols for flexible data transmission
- Protect against spray with IPX4 rating
- Simplify integration with a black box solution
Specifications
| Product Specifications | |
|---|---|
| NMEA 0183 Inputs | 3 |
| NMEA 0183 Output | 1 |
| Baud Rates | 4800/38400 |
| Protocols | TCP, UDP |
| IP Rating | IPX4 |
Who This Is For
Sailors and power boaters seeking to leverage their existing NMEA 0183 equipment with modern navigation apps on smart devices. Ideal for those wanting to display GPS, AIS, and instrument data on tablets for enhanced situational awareness.
How It Compares
| Feature | Digital Yacht WLN30 NMEA Multiplexer | Actisense EMU |
|---|---|---|
| NMEA 0183 Inputs | 3 | 1 |
| Wireless Connectivity | Yes (Wi-Fi) | No |
| Protocol Support | TCP, UDP | NMEA 0183, NMEA 2000 |
| Configuration Method | Web Interface | Software Configuration |
Common Concerns Answered
How reliable is the Wi-Fi connection at sea?
The WLN30 provides a secure Wi-Fi network for data transmission. While occasional Wi-Fi connectivity issues can occur in very crowded RF environments, its dedicated network offers robust performance for typical marine use.
Will this work with NMEA 2000 devices?
The WLN30 is specifically designed to bridge NMEA 0183 systems to wireless devices. For NMEA 2000 integration, a separate interface or gateway would be required, as this unit exclusively supports NMEA 0183 inputs and outputs.
Is wireless connectivity complex to set up on a boat?
Installation and configuration are designed to be straightforward. Basic wiring for NMEA 0183 connections and power is required, with all settings managed via an intuitive web browser interface, making integration with existing systems manageable.
Frequently Asked Questions
How do I connect my smartphone or tablet to my boat's navigation system using the WLN30?
Connect your NMEA 0183 devices (GPS, AIS, etc.) to the WLN30's inputs, power the unit, and then connect your smartphone or tablet to the Wi-Fi network created by the WLN30. You can then use compatible navigation apps that support Wi-Fi NMEA input.
Can the WLN30 transmit AIS data to my navigation app?
Yes, if your AIS transponder or receiver outputs NMEA 0183 data, it can be connected to one of the WLN30's inputs. The multiplexer will then transmit this AIS data wirelessly to your connected navigation app.
What NMEA 0183 baud rates does the WLN30 support?
The WLN30 supports both standard 4800 baud rates for GPS and most instruments, as well as the faster 38400 baud rate commonly used for AIS transponders and high-speed data.
How do I configure the WLN30's settings?
Configuration is performed through a web browser interface. Once connected to the WLN30's Wi-Fi network, navigate to its IP address in your browser to access settings such as baud rates, protocol selection, and input/output assignments.
Can the WLN30 be used for autopilot control?
Yes, the WLN30 features a bi-directional Wi-Fi interface that allows it to send steering commands from your navigation app or device back to an NMEA 0183 compatible autopilot system.
