Description
Scanstrut DS-H10 Waterproof Cable Seal | Boat Supply Store
This robust horizontal cable seal ensures a 100% waterproof (IPX68) installation for cables passing through decks, vital for maintaining vessel integrity offshore. Its innovative split-seal design facilitates installation without disconnecting existing cable connectors, a critical time-saver for technicians routing antenna or navigation light cables. Manufactured from stainless steel, it features a tapered gland and closed-cell foam gasket for optimal deck sealing, withstanding harsh marine environments like those found in the Gulf Coast shallows.
Key Features
- Achieve 100% waterproof integrity with an IPX68 rating.
- Benefit from a tapered gland design for a secure watertight seal.
- Ensure reliable deck sealing with a closed-cell foam gasket.
- Utilize the split-seal option to install without removing cable connectors.
- Benefit from low-profile, impact-resistant construction.
- Enjoy easy installation with included pre-drilled and blank inner seals.
- Rely on durable stainless steel construction for longevity.
- Simplify routing for various marine electronics like antennas and navigation lights.
Specifications
| Product Specifications | |
|---|---|
| Brand | Scanstrut |
| Model | DS-H10 |
| Color | Grey |
| Cable Diameter Range | 6-10mm (.24"-.39") |
| Dimensions | 27mm (Height) x 44.5mm (Width) |
| Material | Stainless Steel |
| Waterproof Rating | IPX68 |
| Features | Tapered gland, foam gasket, split-seal option |
Who This Is For
Boat owners and marine technicians requiring a dependable, IPX68-rated solution for horizontally routing cables through decks. Ideal for applications such as solar panel connections, light bar wiring, and antenna installations on offshore vessels.
How It Compares
| Feature | Scanstrut DS-H10 Waterproof Cable Seal | Blue Sea Systems 5027 Waterproof Cable |
|---|---|---|
| Waterproof Rating | IPX68 | IP67, Not explicitly stated for cable sealing |
| Cable Diameter Range | 6 - 10 mm (.24" - .39") | — |
| Material | Stainless Steel | UV-resistant ABS plastic, Bronze |
| Split-Seal (No Connector Removal) | Yes | No, No |
Common Concerns Answered
What if my cable diameter is outside the 6-10mm range?
The Scanstrut DS-H10 is optimized for cables within the 6mm to 10mm diameter range. For cables significantly thicker or multiple smaller cables requiring a single entry point, alternative solutions may be necessary. Consult the product manual for detailed specifications or explore our wider range of wire management solutions at BoatSupplyStore.com.
I'm concerned about achieving a truly watertight seal.
While the split-seal option simplifies installation, precise alignment and proper tightening are critical for achieving optimal IPX68-rated watertightness. Ensure the deck surface is clean and smooth, and follow the installation guide meticulously. Many customers report successful, robust seals with careful adherence to instructions.
Is this suitable for very high-pressure water exposure?
The DS-H10 is rated IPX68, signifying submersion in up to 1.5 meters of water for 30 minutes, and protection against high-pressure water jets from any direction. This rating ensures robust protection for typical marine applications, including those on vessels operating in challenging conditions.
Frequently Asked Questions
What is the IP rating of the Scanstrut DS-H10 Horizontal Cable Seal?
The Scanstrut DS-H10 Horizontal Cable Seal is rated IPX68, indicating it is protected against dust ingress and can withstand submersion in up to 1.5 meters of water for 30 minutes, as well as high-pressure water jets.
What cable diameter range does the Scanstrut DS-H10 support?
The Scanstrut DS-H10 supports cable diameters ranging from 6mm to 10mm (approximately 0.24 inches to 0.39 inches).
Can I install the Scanstrut DS-H10 without removing cable connectors?
Yes, the Scanstrut DS-H10 features a unique split-seal option that allows for installation without needing to remove cable connectors, simplifying the routing process.
What materials is the Scanstrut DS-H10 made from?
The Scanstrut DS-H10 is constructed from durable stainless steel.
What is included in the box with the Scanstrut DS-H10?
The Scanstrut DS-H10 includes pre-drilled and blank inner seals to facilitate easy installation.
