Description
BoatLIFE Git Rot Kit Quart | Boat Supply Store
Address structural wood degradation with a solution that penetrates and rebuilds compromised timber. This two-part liquid epoxy system is engineered to infiltrate deep into rotted wood fibers, restoring original strength and integrity from within. Designed for critical components like transoms, stringers, and cabin roofs, it cures overnight and can be subsequently drilled, screwed, or painted.
Key Features
- Deep Penetration saturates and restores strength to rotted wood fibers.
- Structural Restoration rebuilds integrity of damaged wood components.
- Quick Curing solidifies overnight for immediate subsequent work.
- Post-Cure Machinability allows drilling and screwing without material failure.
- Versatile Application suitable for transoms, stringers, and cabin roof rot.
- Broad Compatibility integrates with common fiberglass resins, epoxies, and sealants.
- User-Friendly Mixing with a 30-minute pot life for controlled application.
- Durable Finish results in a sandable and paintable surface.
Specifications
| Product Specifications | |
|---|---|
| System Type | Two-part liquid epoxy |
| Application Method | Injection |
| Wood Condition Required | Dry |
| Pot Life | 30 minutes |
| Cure Time | Overnight |
| Post-Cure Properties | Sandable, paintable, drillable, screwable |
| Compatibility | Common marine resins and sealants |
| Volume | Quart |
Who This Is For
Boat owners and marine repair professionals seeking to rehabilitate structurally compromised wood. Ideal for those addressing rot in high-stress areas of both wood and fiberglass vessels.
How It Compares
| Feature | BoatLIFE Git Rot Kit Quart | Competitor |
|---|---|---|
| Primary Function | Restores strength to rotted wood by saturation | General purpose epoxy for laminating, coating, bonding, gap filling, Low viscosity epoxy for wood saturation and laminating |
| Wood Rot Saturation Capability | High - designed to work with loose rotted fibers | Moderate - can saturate wood but not specifically formulated for rotted fibers, Good - designed for wood saturation |
| Cure Time (Overnight) | Yes | Approx. 7-10 hours at 72°F, Approx. 24 hours at 70°F |
| Drillable/Screwable | Yes | Yes, Yes |
| Volume | 1 Quart | 1 Quart Resin + 1 Pint Hardener, 1 Quart Resin + 1 Pint Hardener |
Common Concerns Answered
The product requires the wood to be completely dry. What is the best way to ensure this for optimal penetration?
For optimal penetration and resin encapsulation, ensure the affected wood is thoroughly dried using heat guns or by allowing ample air circulation for an extended period. Moisture content below 10% is recommended for effective saturation.
The 30-minute pot life seems short. What is the recommended approach for mixing and application?
The 30-minute pot life necessitates efficient workflow. Mix only the amount that can be applied within this timeframe, and have all injection sites prepared beforehand. Work systematically to ensure complete saturation before the epoxy begins to gel.
Some users find the injection method messy. What tips can improve application cleanliness?
Utilize specialized injection tips and ensure a snug fit into pre-drilled holes. Apply a small amount of release agent around the injection ports to prevent epoxy run-off, and have absorbent materials readily available for immediate cleanup of any incidental drips.
Frequently Asked Questions
How does BoatLIFE Git Rot Kit work?
BoatLIFE Git Rot Kit works by utilizing a two-part liquid epoxy that, when mixed, penetrates deep into the damaged fibers of rotted wood. It fills voids and encapsulates the wood structure, effectively rebuilding its original strength and integrity through capillary action.
What types of wood can I use BoatLIFE Git Rot Kit on?
This kit is designed for use on various wood types commonly found in marine applications, including pine, oak, and plywood, provided the wood is rotted and dry. It's effective in both wood and fiberglass boat construction.
How long does BoatLIFE Git Rot Kit take to cure?
BoatLIFE Git Rot Kit cures overnight, typically within 12-18 hours depending on ambient temperature and humidity. This rapid curing process allows for subsequent structural work soon after application.
Can BoatLIFE Git Rot Kit be drilled or screwed into after curing?
Yes, after the epoxy has fully cured, the treated wood can be drilled into and screws can be driven into it, just like solid, untreated wood, allowing for reattachment of hardware or further structural modifications.
Is BoatLIFE Git Rot Kit compatible with other boat repair materials?
Yes, BoatLIFE Git Rot Kit is compatible with common marine resins, epoxies, and most sealants, ensuring it can be integrated into broader boat repair and restoration projects without compromising material integrity.
