Description
BPS Marine PRO-6 Ultrasonic Antifouling System | Boat Supply Store
Eliminate the pervasive issue of marine growth and its detrimental effects on vessel performance with the BPS Marine PRO-6 system. This comprehensive, chemical-free solution deploys six submersible ultrasonic transducers, operating on a multi-frequency sweep algorithm from 20kHz to 42kHz, to deter biofouling on hulls up to 75ft. Achieving an average power draw of 1.5Ah with 120W transducer strength, this system significantly reduces drag, extends bottom paint longevity, and minimizes the need for diver services or frequent haul-outs.
Key Features
- Defend against marine growth with six submersible ultrasonic transducers.
- Safeguard hulls, drives, rudders, and stabilizers on vessels up to 75ft.
- Optimize performance for pods or stern drives on vessels under 60'.
- Employ a dynamic multi-frequency ultrasonic sweep (20kHz-42kHz) for maximum efficacy.
- Embrace 100% chemical-free and eco-friendly antifouling.
- Boost fuel efficiency by reducing hydrodynamic drag.
- Extend the service life of bottom paint and reduce haul-out frequency.
- Achieve zero scheduled maintenance with a fit-and-forget installation.
Specifications
| Product Specifications | |
|---|---|
| System Voltage | 24VDC |
| Number of Transducers | 6 |
| Transducer Cable Length | 15ft per transducer |
| Average Power Draw | 1.5Ah |
| Transducer Strength | 120W |
| Ultrasonic Frequency Range | 20kHz - 42kHz |
| Maximum Hull Length | 75ft |
Who This Is For
Boat owners seeking an environmentally responsible, chemical-free method to combat marine growth on vessels up to 75 feet. This system is particularly advantageous for owners of pod or stern drive configurations under 60 feet who desire minimal maintenance.
How It Compares
| Feature | BPS Marine PRO-6 Ultrasonic Antifouling System | Competitor |
|---|---|---|
| Number of Transducers | 6 | 2, 4 |
| Maximum Hull Length | 75ft | — |
| Voltage | 24VDC | 12/24VDC, 12/24VDC |
| Transducer Cable Length | 15ft | — |
| Chemical-Free | Yes | Yes, Yes |
Common Concerns Answered
Is the initial cost higher than traditional bottom paint?
The initial investment for the BPS Marine PRO-6 is higher than traditional bottom paint, but its long-term benefits, including reduced maintenance, extended paint life, and improved fuel efficiency, offer significant value over the system's lifespan.
Will the system work in all water conditions and with all types of marine growth?
Effectiveness can vary based on specific water conditions and the prevalent marine growth species. The PRO-6's multi-frequency sweep algorithm is designed to address a broad range of fouling organisms, but optimal results are achieved with proper installation and adherence to recommended usage guidelines.
Does the installation require specialized skills?
While the system is designed for straightforward installation without thru-hulls, it necessitates meticulous surface preparation for transducer adhesion and careful cable management. Basic electrical knowledge for battery connection is required; professional installation is recommended for those without prior experience in marine electronics.
Frequently Asked Questions
How does the BPS Marine PRO-6 ultrasonic antifouling system work?
The system generates ultrasonic waves at varying frequencies (20kHz-42kHz) which create micro-vibrations on the hull's surface. These vibrations disrupt the settling and attachment process of marine organisms like barnacles, algae, and slime, preventing them from colonizing the hull.
What is the effective range of the BPS Marine PRO-6 system?
The BPS Marine PRO-6 is designed to protect vessels up to 75 feet in length. The effective range is dictated by the placement and number of the six transducers, ensuring comprehensive coverage of the underwater hull, drives, and appendages.
Is the BPS Marine PRO-6 system safe for marine life and the environment?
Yes, the BPS Marine PRO-6 is 100% chemical-free and operates solely using ultrasonic vibrations. This method is environmentally sound and does not release any harmful toxins into the water, posing no threat to fish, dolphins, or other marine life.
What is included in the BPS Marine PRO-6 package?
The standard package includes the central control unit, six submersible ultrasonic transducers each with 15ft of cable, and necessary mounting hardware. Specific electrical wiring connectors may also be included, but a boat's battery and appropriate gauge wiring are required for installation.
Can the BPS Marine PRO-6 system be used on boats with pods or stern drives?
Yes, the BPS Marine PRO-6 is particularly well-suited for vessels with pod or stern drive configurations, especially those under 60 feet. The transducers can be strategically placed to protect these complex drive systems from marine growth.
