Description
Smart Tabs II 16"x10" Auto Trim Tabs | Boat Supply Store
This system addresses the common challenge of poor planing and ride comfort on trailerable vessels by automatically adjusting trim. The Lectrotab Smart Tabs II Series features two 16" x 10" stainless steel plates, each utilizing maintenance-free nitrogen gas actuators for enhanced stern lift and stability. These tabs are engineered for fiberglass, aluminum, and RIB boats ranging from 23' to 30', providing significant improvements in acceleration, top speed, and handling without requiring any user input or complex electrical or hydraulic systems. They effectively reduce minimum planing speed by up to 33%, making it easier to get on plane in less time, akin to improving the launch efficiency for a bay boat fishing the flats.
Key Features
- Fully automatic operation, no pilot interface required
- Self-adjusting to boat speed and water conditions
- Nitrogen gas actuators for increased stern lift and dampening
- Reduces minimum planing speed by up to 33%
- Improves acceleration, top speed, handling, and safety
- Provides a level, more comfortable ride
- No hydraulics, no electric switches, no maintenance
- Simple installation with basic tools, no through-hull drilling
Specifications
| Product Specifications | |
|---|---|
| Brand | Lectrotab |
| Model | Smart Tabs II Series |
| Dimensions | 16" x 10" |
| Recommended Boat Length | 23'-30' |
| Maximum Gross Weight | 8,500 lbs |
| Transom Width | <10' |
| Actuator Type | Nitrogen Gas |
Who This Is For
Owners of fiberglass, aluminum, and RIB boats between 23' and 30' with transom widths less than 10 feet and a maximum gross weight of 8,500 lbs. Ideal for those seeking an automatic, maintenance-free trim tab system to improve performance, ride comfort, and fuel efficiency without complex installation.
How It Compares
| Feature | Smart Tabs II 16"x10" Auto Trim Tabs | Requires electrical wiring |
|---|---|---|
| Actuator Type | Nitrogen Gas | Electric Hydraulic, Electric Hydraulic |
| Control Type | Fully Automatic (No Switches) | Wired Switch Panel, Switch Panel with Auto-Retract |
| Installation Complexity | Simple (No through-hull drilling, no electrical/hydraulic) | Moderate (Requires hydraulic lines and electrical wiring), Moderate |
| Maintenance | None | Periodic checks of hydraulic fluid and seals, Periodic checks of electrical connections and actuators |
| Recommended Boat Length | 23'-30' | 20'-25', 20'-25' |
| Max Boat Weight | 8500 lbs | Varies by specific model, typically up to 6000 lbs for this size, Varies by specific model, typically up to 6000 lbs for this size |
Common Concerns Answered
Can I return these trim tabs if I'm not satisfied?
The Lectrotab Smart Tabs II Series are non-returnable to the point of purchase. For any issues, direct contact with the manufacturer is required. This policy ensures focus on the product's direct support and guarantees of performance.
What if I'm unhappy with the performance after installation?
Customer sentiment is highly positive regarding performance improvements like reduced planing speed and enhanced stability. While initial adjustment during installation is critical for optimal results, the maintenance-free and automatic nature of the nitrogen gas actuators typically leads to significant performance gains that satisfy users.
Are these trim tabs difficult to install?
Installation difficulty is rated 2/5. The process is simple, requiring basic tools such as an electric drill, small drill bit, Phillips screwdriver, and two wrenches, with no through-hull drilling necessary. Professional installers can complete the task in 30 minutes or less.
Frequently Asked Questions
How do Smart Tabs II Series Trim Tabs work automatically?
The Smart Tabs II utilize nitrogen gas actuators that automatically adjust the trim tab angle in response to changes in boat speed and water conditions, requiring no user intervention or electrical/hydraulic input.
What is the maximum boat weight for the Lectrotab ST1610-160?
The maximum gross weight for boats fitted with the Lectrotab Smart Tabs II Series ST1610-160 is 8,500 lbs.
Do I need switches or electrical connections for these trim tabs?
No, the Smart Tabs II Series are designed for fully automatic operation and require no electrical switches, wiring, or hydraulic connections.
What is the recommended boat length for the Lectrotab Smart Tabs II?
These trim tabs are recommended for boats ranging from 23' to 30' in length.
Will these trim tabs improve my boat's fuel economy?
By improving planing efficiency and reducing the time spent at higher, less efficient speeds, the Smart Tabs II Series can contribute to improved fuel economy.
