Description
Victron Inverter Remote On-Off Cable for Phoenix | Boat Supply Store
Integrate older Victron Phoenix Inverters with advanced battery management systems using this remote on/off control cable. It facilitates automated operation for specific models including the 12/180 and 24/350 variants. The cable directly connects to a VE.Bus BMS for low-voltage battery shutoff or to the load output of a BlueSolar MPPT Charger for intelligent power cycling, ensuring optimal battery health and system efficiency for offshore cruisers.
Key Features
- Automate inverter operation based on battery status or solar charge.
- Enable remote on/off control for Victron Phoenix Inverter models 12/180, 24/180, 12/350, and 24/350.
- Connect directly to a Victron VE.Bus BMS for essential battery low-voltage shutoff.
- Integrate with the load output of a Victron BlueSolar MPPT Charger for programmable inverter control.
- Ensure seamless integration between legacy inverters and modern energy management solutions.
- Simplify power management by allowing external triggering of inverter activation.
- Facilitate battery protection through automated inverter shutdown.
- Achieve plug-and-play installation with straightforward connection points.
Specifications
| Product Specifications | |
|---|---|
| Cable Type | Remote On-Off Control |
| Compatible Inverter Models | Victron Phoenix 12/180, 24/180, 12/350, 24/350 |
| Compatible Controllers | Victron VE.Bus BMS, Victron BlueSolar MPPT Charger Load Output |
Who This Is For
This cable is designed for marine and RV users who possess specific, older Victron Phoenix Inverter models (12/180, 24/180, 12/350, 24/350) and wish to integrate them with a VE.Bus BMS or BlueSolar MPPT Charger for automated control. It is intended for those seeking to leverage existing hardware for intelligent power management based on battery state or solar availability.
How It Compares
| Feature | Victron Inverter Remote On-Off Cable for Phoenix | Victron Energy VE.Bus to VE.Can Interface |
|---|---|---|
| Primary Function | Remote On/Off for specific Victron Phoenix Inverters | VE.Bus to VE.Can communication bridge |
| Compatibility | Victron Phoenix Inverter 12/180, 24/180, 12/350, 24/350; VE.Bus BMS; BlueSolar MPPT Charger load output | VE.Bus devices and CAN-bus devices |
| Integration with BMS/Charger | Direct connection for on/off control | Enables communication, not direct on/off control of inverters |
Common Concerns Answered
Is this cable compatible with newer Victron inverter models?
No, this cable is specifically designed for older Victron Phoenix Inverter models including the 12/180, 24/180, 12/350, and 24/350. It is not compatible with newer Victron inverter product lines.
What if I can't find the specific discontinued inverter models this cable supports?
The utility of this cable is directly tied to owning one of the specified discontinued Phoenix inverter models. If you do not own one of these specific inverters, this cable will not be applicable to your current setup.
I'm confused about its limited scope. What is the main benefit for my older inverter?
This cable provides a cost-effective method to integrate your existing, compatible older Victron Phoenix inverter into a modern battery management or solar charging system, enabling automated on/off control. This prevents unnecessary battery drain and protects your battery bank from over-discharge.
Frequently Asked Questions
What Victron inverters are compatible with the Victron Inverter Remote On-Off Cable?
The Victron Inverter Remote On-Off Cable (SKU CWR97623) is compatible with Victron Phoenix Inverter models 12/180, 24/180, 12/350, and 24/350.
Can I use the Victron Inverter Remote On-Off Cable with a BlueSolar MPPT Charger?
Yes, this cable can connect to the load output of a Victron BlueSolar MPPT Charger, allowing the charger to control the on/off state of the compatible Phoenix inverter.
How does the Victron Inverter Remote On-Off Cable work with a VE.Bus BMS?
When connected to a Victron VE.Bus BMS, the cable enables the BMS to automatically shut off the connected Phoenix inverter if the battery voltage drops to a critical low-voltage threshold, protecting the battery from deep discharge.
Is the Victron Inverter Remote On-Off Cable compatible with newer Victron inverter models?
No, this cable is specifically designed for older Victron Phoenix Inverter models (12/180, 24/180, 12/350, 24/350) and is not compatible with newer Victron inverter generations.
What is the primary purpose of the Victron Inverter Remote On-Off Cable?
The primary purpose of this cable is to provide remote on/off control for specific older Victron Phoenix Inverter models, integrating them with battery management systems (like VE.Bus BMS) or solar charge controllers (like BlueSolar MPPT) for automated power management and battery protection.
