Description
Victron Phoenix Smart IP43 Charger 24/16 | Boat Supply Store
For offshore vessels and complex cruising yachts operating on 24V systems, this charger addresses the critical need for simultaneous, optimized charging of both house and starter battery banks. It delivers a substantial 16A primary charge current to the house bank while providing a dedicated, low-current (~4A) output for maintaining the starter battery, preventing voltage drop with automatic compensation up to VE.Direct interface capabilities. The advanced adaptive 6-stage charging algorithm ensures maximum battery lifespan and performance through dynamic charge cycles including Bulk, Absorption, Recondition, Float, Storage, and Refresh modes.
Key Features
- Wireless Control: Built-in Bluetooth Smart for remote setup, monitoring, and firmware updates via app.
- Dual Output: Unique (1+1) configuration with dedicated outputs for house bank and starter battery.
- Advanced Charging: Adaptive 6-stage algorithm (Bulk, Absorption, Recondition, Float, Storage, Refresh) ensures optimal battery health.
- Gassing Prevention: BatterySafe mode protects against damage from excessive gassing during charging.
- Maintenance Charging: Storage Mode minimizes maintenance and aging during periods of non-use.
- Versatile Compatibility: Supports Li-ion (LiFePO4) batteries in addition to lead-acid types.
- System Integration: VE.Direct interface and programmable relay enable seamless integration with other marine electronics.
- Networked Charging: Synchronize multiple chargers in a VE.Smart Network for increased capacity.
Specifications
| Product Specifications | |
|---|---|
| 24V | 24V |
| Charge Current | 16A |
| Output Configuration | (1+1) |
| Starter Battery Output | ~4A |
| Input Voltage | 120-240VAC |
| Bluetooth | Smart enabled |
| Charging Algorithm | Adaptive 6-stage |
| VE.Direct Interface | Yes |
| Programmable Relay | Yes |
| Requires Mains Cord | 5-15P (not included) |
| Safety Certifications | CE |
Who This Is For
Marine enthusiasts and boat owners with 24V battery systems requiring a sophisticated, adaptive charging solution for multiple battery banks, including a dedicated trickle charge for the starter battery. Ideal for those who value remote monitoring and control via Bluetooth.
How It Compares
| Feature | Victron Phoenix Smart IP43 Charger 24/16 | Competitor |
|---|---|---|
| Output Current (Primary) | 16A | 100A, 20A |
| Starter Battery Output | ~4A | N/A (integrated inverter/charger), N/A |
| Bluetooth Connectivity | Yes | No, No |
| Adaptive 6-Stage Charging | Yes | Yes (proprietary algorithm), Yes |
| BatterySafe Mode | Yes | Yes, No |
Common Concerns Answered
What are the main complaints about this charger?
Users note that the mains cord is not included, requiring an additional purchase. Initial Bluetooth setup may present a slight learning curve for less experienced users. Additionally, the starter battery output is deliberately limited and may not be suitable for very high-demand starter batteries.
Is the starter battery output sufficient for all boats?
The ~4A starter battery output is designed for maintaining charge on typical marine starter batteries, preventing parasitic drain. For starter batteries with exceptionally high cranking current requirements or those subjected to frequent deep discharges, an auxiliary charging solution might be considered.
What should I know about the included accessories?
This charger requires a separate purchase of a 5-15P mains cord. All necessary battery and AC wiring connections are user-provided, necessitating basic electrical knowledge and appropriate marine-grade cabling.
Frequently Asked Questions
What is the Victron Phoenix Smart IP43 Charger 24/16 (1+1) designed for?
It is designed for 24V marine battery systems, providing optimized charging for both primary house banks and dedicated maintenance for starter batteries, featuring advanced adaptive charging and Bluetooth connectivity.
How does the Bluetooth Smart feature work on this charger?
The built-in Bluetooth Smart allows for wireless setup, real-time monitoring of charging status and battery health, and firmware updates via the VictronConnect app on your smartphone or tablet.
What is the difference between the (1+1) and (3) output models of the Phoenix Smart Charger?
The (1+1) model features one primary output for the house bank and a separate, lower-current output specifically for the starter battery. The (3) output models offer three distinct outputs for multiple house or service batteries.
Can this charger be used with Li-ion (LiFePO4) batteries?
Yes, the Victron Phoenix Smart IP43 Charger is compatible with Li-ion (LiFePO4) batteries, offering optimized charging profiles for these advanced battery chemistries.
What is the voltage and current output for the starter battery on the (1+1) model?
The dedicated starter battery output on the (1+1) model provides approximately 4A of charge current, sufficient for maintaining a typical marine starter battery.
