Description
Humminbird XP-14-HW Transducer | Boat Supply Store
For SOLIX G2 users seeking superior 2D sonar performance without external hull penetration, the Humminbird XP-14-HW offers discreet in-hull mounting. This transducer utilizes Dual Spectrum CHIRP across frequencies of 150-220 kHz, achieving a maximum depth penetration of 1200 feet. Ideal for maintaining hull integrity and aesthetics on fiberglass vessels in coastal or freshwater environments.
Key Features
- Discreet in-hull installation for unobstructed hull.
- Advanced Dual Spectrum CHIRP 2D sonar.
- Superior depth penetration up to 1200ft (365m).
- Precise target separation for accurate fish detection.
- Optimized for single-layer fiberglass hull mounting.
- Includes essential epoxy kit for secure installation.
- Long 20' cable for flexible unit placement.
- Specifically engineered for Humminbird SOLIX G2 models.
Specifications
| Product Specifications | |
|---|---|
| Transducer Type | In-hull Dual Spectrum CHIRP |
| Compatible Models | Humminbird SOLIX G2 (10, 12, 15) |
| 2D Sonar Support | Dual Spectrum CHIRP |
| Frequency Range (Full) | 150-220 kHz |
| Frequency Range (Narrow) | 180-240 kHz |
| Frequency Range (Wide) | 140-200 kHz |
| Maximum Depth | 1200 ft (365 m) |
| Hull Type Compatibility | Single-layer fiberglass |
| Cable Length | 20 ft |
| Included Accessories | Epoxy kit |
Who This Is For
Boaters with Humminbird SOLIX G2 units requiring an internal 2D sonar transducer for optimal hull protection and clean aesthetics. This is an ideal choice for those who prioritize a stealthy installation on single-layer fiberglass hulls.
How It Compares
| Feature | Humminbird XP-14-HW Transducer | Competitor |
|---|---|---|
| Hull Mount Type | In-Hull (Glue-in) | Transom Mount, Transom Mount |
| Primary Sonar Technology | Dual Spectrum CHIRP 2D Sonar | UHD Scanning Sonar (ClearVü, SideVü) with CHIRP, Active Imaging, CHIRP, SideScan, DownScan |
| Max Depth (CHIRP) | 1200ft (365m) | — |
| CHIRP Frequency Range (Narrow) | 180-240 kHz | Not specified for narrow CHIRP, but UHD frequencies are higher, Not specified for narrow CHIRP, but Active Imaging frequencies are higher |
| CHIRP Frequency Range (Wide) | 140-200 kHz | Not specified for wide CHIRP, but UHD frequencies are higher, Not specified for wide CHIRP, but Active Imaging frequencies are higher |
| Includes Epoxy Kit | Yes | No, No |
Common Concerns Answered
Will this transducer work for detailed underwater structure mapping?
The Humminbird XP-14-HW is specifically designed for advanced Dual Spectrum CHIRP 2D sonar and does not support Side Imaging or Down Imaging, which are typically used for detailed structure mapping.
Can I install this on any boat hull?
Optimal installation and performance are achieved on single-layer fiberglass hulls. Installation on other hull types may compromise sonar accuracy or the integrity of the hull seal.
What is the typical customer feedback on this product?
Customers generally praise the discreet in-hull mounting and reliable 2D sonar performance for their SOLIX units. Some users may indicate a preference for integrated scanning sonar features if they are not already covered by their existing setup.
Frequently Asked Questions
What is the maximum depth capability of the Humminbird XP-14-HW transducer?
The Humminbird XP-14-HW transducer offers a maximum depth capability of 1200 feet (365 meters).
What Humminbird SOLIX models are compatible with the XP-14-HW transducer?
The XP-14-HW transducer is compatible with Humminbird SOLIX G2 models, specifically the SOLIX 10, SOLIX 12, and SOLIX 15 units.
Does the XP-14-HW transducer support Side Imaging or Down Imaging?
No, the Humminbird XP-14-HW transducer does not support Side Imaging or Down Imaging; it is exclusively designed for Dual Spectrum CHIRP 2D sonar.
What frequencies does the Dual Spectrum CHIRP on the XP-14-HW transducer operate on?
The Dual Spectrum CHIRP on the XP-14-HW operates with a Full frequency range of 150-220 kHz, a Narrow frequency range of 180-240 kHz, and a Wide frequency range of 140-200 kHz.
What type of hull installation is recommended for the XP-14-HW transducer?
The XP-14-HW transducer is recommended for an in-hull, glue-in installation specifically on single-layer fiberglass hulls to ensure optimal performance and mounting integrity.
